Rechargeable Wireless Panic Button Caregiver Pager Smart Call Transmitter

[Stable Signal and Anti-interference] Stable signal for 1000 feet long-range transmission; Features an enhanced anti-interference for patented pair technology.
[Caller Display and Easily Expandable] The receiver have caller display function which can tell you who call for help; the system is expandable for more receiver and more call button.
[Rechargeable and Portable] Equipped with a 500mA Li battery with low power indicator, The CALL button can be fully charged in about 3 hours and stays charged for up to 30 days.The receiver can be fully charged in about 3 hours and stays charged for up to 7 days. With lanyard and belt buckle for easily carring.
[Volume and Tones Adjustable] There are 4 volume levels and 12 tones available; Besides, the CALL button have a night lights for better use.
 
Product Description
Model NO 
CH-19089-White-1T1 
CH-19089-White-1T2 
CH-1908-White-RECEIVER 
CH-1909-White-CALL 
CH-19089-Black-1T1 
Connection 
one receiver can connect with eight call buttons at most, and one call button can connect with as many receivers as you require 
one receiver can connect with eight call buttons at most, and one call button can connect with as many receivers as you require 
one receiver can connect with eight call buttons at most 
one call button can connect with as many receivers as you require 
one receiver can connect with eight call buttons at most, and one call button can connect with as many receivers as you require 
Power Port 
5V 1A 
5V 1A 
5V 1A 
5V 1A 
5V 1A 
Power ON/OFF Key 
✓ 
✓ 
✓ 
✓ 
✓ 
Expandable 
✓ 
✓ 
✓ 
✓ 
✓ 
Rechargeable 
✓ 
✓ 
✓ 
✓ 
✓ 
Caller Display 
✓ 
✓ 
✓ 
✓ 
✓ 
Use For 
Home, Office, Hospital, Outdoor Activities 
Home, Office, Hospital, Outdoor Activities 
Home, Office, Hospital, Outdoor Activities 
Home, Office, Hospital, Outdoor Activities 
Home, Office, Hospital, Outdoor Activities 
Adapter 
include 
include 
include 
not include 
include 
Working Time 
Receiver : About 7 days after full charged ；CALL button : About 30 days after full charged 
Receiver : About 7 days after full charged ；CALL button : About 30 days after full charged 
About 7 days after full charged 
About 30 days after full charged 
Receiver : About 7 days after full charged ；CALL button : About 30 days after full charged 
Quick Getting Started ：
Step 1: Turn ON the receiver; Press&Hold the ON/OFF button for 3 seconds to turn on the receiver, all the channel indicator will flash one by one;
Step 2: Charge the units. The units only have 30% power when leave factory, please full charged it before using;
Step 3: set the volume and tones as your requirement after full charged.
Step 4:After you finished volume and tones setting, you can test the connection. Press the CALL button, the receiver will have a ring, and corresponding channel light have a blue light flash;
Step 5: If you have a large system with many CALL button and receiver, you may need an “address list” to help you remember which units belong to which users.
Step 6:After testing, you can assign different units to different users, and distribute the “address list” to the receiver users.
Troubleshooting:
1.Can't be powered on after fully charged?---Please remove the back cover to unplug the battery and plug it back in, and then it will work properly;
2.The power indicator does not light ---Check if the adapter and cable are working；
3. NO beeping sound when turning OFF the receiver---Check to ensure the receiver isn’t muted. ；
4.The receiver has no sound, even when paired---Please check if the receiver is muted. Click the volume button to adjust the volume of receiver；
Note:
1.If you buy this system as a set, it was paired before leaving the factory. You can turn the unit ON and charge it, then use it immediately；If you buy extra CALL buttons or receivers, you need to pair the new units with your original units.
2.Please check if the receiver is muted; the receiver doesn’t ring when muted;
3. Please turn ON the receiver when you get them; the receiver was turned off before it left the factory;
4. Only receivers equipped with adapter and cable; use the provided adapter and cable with the CALL button;